Fiber 9.2mm SMPTE 311M: Direct Burial Riser HFCDBR
HFCDBR-1000
Clark Wire & Cable’s HFCDBR riser rated, direct burial SMPTE 311M camera cable is a dual-purpose cable that can be installed underground and within most building structures. With two single-mode fibers for multiplexed video, audio and data, the HFCDBR delivers exceptionally low-loss for HD camera to CCU interconnects. All copper conductors are insulated with a polyethylene dielectric for exceptional heat and current leakage resistance. For added durability, the two single-mode fiber elements are coated with a high tensile strength CPE tight buffer that achieves three times the tensile strength as compared to typical PVC tight buffer compounds. The outer jacket is extruded from a flame retardant PVC compound over a water-blocking tape that wraps around the inner core. This construction is both UL listed and provides an additional level of protection by absorbing moisture within the water-blocking tape in the event that the jacket is penetrated.
$1,950.00 / 1000 Feet
In Stock
In Stock
Typical Lead Time: 0 Days
Fiber Elements
(2) 8.9u Single-Mode, 900u CPE Tight Buffer (1 yellow, 1 blue)
Aux. Elements
(4) 20G (19 x 32G) TC Conductors
PE Insulation .057”
Signal Elements
(2) 24G (7 x 32G) TC Conductors
PE Insulation .044” O.D. (1 red, 1 gray)
Strength Member
(1) 16G Galvanized Steel (19 x 29G) White
Shield
95% TC Braid
Barrier
Water Blocking Tape
Overall Jacket
PVC Jacket, 9.2 mm (.362”) O.D.
Mechanical Characteristics
Operating Temperature: -20°C to +60°C
Tensile Strength: 700 N (min)
Bend Radius: 2.54"
Weight: 79 lbs.
Optical & Electrical Characteristics
Insulation Resistance
Aux: >10M Ω/MftSignal: >10M Ω/Mft
DCR
Aux: 9.6 Ω/Mft
Signal: 23.5 Ω/Mft
Shield: 5.2 Ω/Mft
Dielectric Strength
3000V RMS
Optical Attenuation
<0.70 dB/km (1250nm - 1625nm)
Related Items
